Inspire 1 Drone Parachute Installation Pictorial
This pictorial will help you install and rig the Inspire 1 Parachute Launcher. You can purchase the Inspire 1 Drone Parachute with SATS-MINI Failsafe here. Before starting make sure you have done the initial folding of the Iris parachute and install the parachute into the Skycat X48 Launcher. Refer to:
- How to Fold a Parachute - Follow this guide up to the beginning of Step 4, stopping after "fold the parachute canopy into thirds to create a long rectangle shape."
- Pack and Load the Skycat Drone Parachute Launcher
- Connecting Skycat Inspire Mount with the SATS-MINI - This photo album shows how to install the electronic parts into the Inspire copter equipment box. And then how to connect the failsafe to the Slycat trigger. NOTE: The Mayday has been replaced by the SATS-MINI making the connecten between the Skycat V3 trigger and the SATS-MINI simple. Finally a video on how to test the Failsafe.